The LY-600FX1.5 Coating Thickness Gauge can non-destructively measure the thickness of non-magnetic coatings (e.g., aluminum, chromium, copper, enamel, rubber, paint, etc.) on magnetic metal substrates (e.g., steel, iron, alloys, hard magnetic steel, etc.), including flat surfaces and pipe inner walls.
1. Features
* Spring-guided probe with ultra-wear-resistant alloy tip ensures consistent contact pressure and stable measurement accuracy even on hard or rough surfaces, with a durability exceeding 500,000 measurements.
* High speed: 0.3 seconds per measurement.
* High accuracy and stability, capable of measuring ultra-thin coatings (1-5 μm).
* Wide measurement range with high resolution.
* Light-contact measurement achieves reliable precision.
* Automatic substrate recognition.
* Split-type design, facilitating measurements in narrow areas.
* Dot-matrix backlit display, parallax-free, suitable for night use.
* Auto power-off function for energy saving.
2. Technical parameters
* Display: LCD dot-matrix display
* Measurement Range: 0–1500 μm (Fe), Optional:0–3000 μm (Fe)
* Resolution: 0.1 μm (0–99.9 μm), 1 μm (100–3000 μm)
* Accuracy: 0–1500μm:±2%H +1μm, 1500–3000μm: ±3%H +1.5μm
* Minimum Substrate Thickness: 0.3 mm
* Minimum Curvature Radius: F:凸 1.5mm
* Measurement Modes: Single/Continuous
* Units: μm/mil
* Power Supply: 2×1.5V AA batteries
* Operating Conditions: -10°C to 50°C, <80% RH
* Dimensions: 146×75×30 mm
* Weight: ~250 g (excluding batteries)
3.Package list
* Main Unit ×1
* Fe Calibration Block ×1
* AA Batteries ×2 (excluded for air transport)
* User Manual ×1
* Warranty Card ×1
* Carrying Case ×1
* Calibration Foils (50, 100, 250, 500, 1000 μm) ×1 set
Note: For the 0-3000 μm measurement range, the instrument is supplied with an additional 2000 μm calibration Foil
Product Tags:
|
|
Split Type Coating Thickness Gauge Measuring Flat Surfaces And Pipe Inner Walls Paint Thickness Gauge Images
|
